Interface Force - Multi-axis force sensors (load cells), Pressure Sensor & Pressure Transmitters, Sensor Instrumentation, Custom Designs and Dynamic Pressure Mapping.

Use our live chat service to speak to an operator directly

DFI-02 6 Digit Display

DFI-02 6 Digit Display

Calibration Grade High Accuracy Force Indicator

  • 6 Digit LED Display (±999,999)
  • Resolution to 1 part in 500,000
  • ADC - 24 bit @ 50/sec max.
  • Bipolar ratiometric input ±6mV/V
  • Sensitivity to 0.1µV

The DFI-02 is based on the highly successful DFI-01 and is designed specifically for use in mobile or desktop instrument applications where high accuracy force or weight indication is required. The updated design includes a 24-bit ADC with high stability electronics and the firmware incorporates many new features to make this ideal for ISO-7500/1 calibration systems. The units small physical size and its tilt leg/carry handle offers ease of viewing and portability.

Front panel keys or Remote RS232 offers instant access to Tare, Set Zero, Print, Test (10 display) & Mode (Gross/Net/Peak) with full calibration and set up facilities. The detailed menu driven procedure can be password protected with two access levels to prevent inadvertent changes to calibration or set-up information.

Available Downloads

  • 6 Digit LED Display (±999,999)
  • Resolution to 1 part in 500,000
  • ADC - 24 bit @ 50/sec max.
  • Bipolar ratiometric input ±6mV/V
  • Sensitivity to 0.1µV
  • Peak Capture Facility
  • 5 Vdc Transducer Excitation
  • 6-wire ratiometric input
  • RS-232 control/output port
  • Optional Serial Printer port
  • Optional Analogue output
  • Optional Display Hold*
Input Bipolar or Unipolar
Resolution
Internal
Display

1 part in 16M
1:500,000
Non-linearity
Intergral
Differential

<0,0015%
±0.5 LSB
Stability
Gain
Zero

1.6ppm/°C
<5nV/°C
Operational range Temperature -10 to +40°C
Power Supply 220/240 Vac @ 50/60Hz Internal links for 110/115 Vac optional 12-28 Vdc
Sealing IP54 Front Panel
Interfaces RS-232 3 wire Control Optional RS-485/422
Dimensions (mm) 144 x 72 x 220 (Excluding Handle)

 

Available Downloads

144mm x 72mm x 220mm (Excluding Handle) 

  • Panel mount fixings and sealing gland
  • Calibration Simulator AS600 for simple calibration or routine checking
  • UKAS Calibration
  • ISO 376 Calibration
  • Analog Output with +/-5V, 0-10V, 0/4-20mA
  • Display Hold with plug-in hand-held Freeze switch*
  • DFI-02 digital indicator
  • AC power cable
  • User and Set up manual

Product page last updated: 2015-06-02 16:23:30