Interface Force - Multi-axis force sensors (load cells), Pressure Sensor & Pressure Transmitters, Sensor Instrumentation, Custom Designs and Dynamic Pressure Mapping.

Use our live chat service to speak to an operator directly

1800 Platinum Series

1800 Platinum Series

Enhanced Calibration Grade

  • Handcrafted to meet the most demanding requirements
  • 0.005% non-repeatability
  • ASTM E74 calibration standard
  • Tension and Compression in one unit
  • 2% lower limit
  • Optional ISO376 calibration

The 1800 Platinum Standard series is an enhanced calibration grade Low Profile load cell that offers improved accuracy of performance and temperature characteristics. Additional gauges help improve the performance for best resolution at all capacities. The load cell thread adaptor, male or female, is now integral being machined from the same material blank as the load cell. The integral fitting removes any uncertainty of thread engagement which with a stiff flexure could otherwise cause poor non-repeatability at lower applied forces. The 1800 units are warranted to perform down to 2% of rated capacity per ASTM-E74 and every unit is supplied with a NIST traceable ASTM-E74 calibration certificate.

Available Downloads

  • Warranted performance to 0.02%
  • Warranted non-repeatability to +/- 0.005% or better
  • Capacities from 25kN to 250kN (5.5Klbf to 55Klbf)
  • High output to 4.0 mV/V for highest resolution
  • Integral machined calibration adaptor
  • Moment compensation for enhanced insensitivity to extraneous loads
  • Excellent temperature characteristics
  • Extra Low deflection
  • Individual ASTM-E74 calibration certificate traceable to National Standards (NIST)
  • Internal electronic ID function
  • Connector Protector

Available Downloads

  • Special thread sizes
  • Display electronics or data acquisition system
  • Special fittings
  • Optional ISO376 calibration
  • Load cell with fitted base
  • Supplied with mating connector
  • NIST traceable ASTM-E74 Calibration Certificate

Product page last updated: 2016-03-08 09:17:42