Interface Force - Multi-axis force sensors (load cells), Pressure Sensor & Pressure Transmitters, Sensor Instrumentation, Custom Designs and Dynamic Pressure Mapping.

BPL Brake Pedal Cell

Pedal Load Cell

The BPL Pedal Load Cell is an ultra low profile load cell for use with brake, clutch and accelerator (gas) pedals or any foot pedal where force measurement is required. This device offers the lowest hysteresis and non-linearity of any product of this type available 

View product

Custom Solutions

Micro Switch Box

At Interface Force Measurements, we pride ourselves on being able to help with unique, cost effective solutions for our customer’s  more unusual force, torque and pressure measurement applications.

So when a customer came to us with a challenging application to measure uniformity of force in a mould clamping device, we were happy to help. 

We custom built a micro junction box measuring just 50mm x 50mm x 25mm linked to three Interface LBM load buttons, each with it’s own adjustment pot.  The junction box was switch-able four-ways to enable output from each load button or total load to be displayed via a hi-resolution digital display.

View product

ITL Tension Load Link

Stainless Steel Tension Link

The Interface ITL is tension load link featuring full stainless steel construction with IP66 environmental protection for lifting and weighing applications in the most demanding conditions

The ITL series is designed for easy installation and use with standard size shackles and can be connected to a digital indicator such as the Interface 9320 via  a MIL specification connector and cable    

View product

LP Wired and Wireless Load Pins

Custom wired and wireless load pins

The Interface range of load pin are a stainless steel, dual sheer beam. They are designed for center loading with support at both end. 

Like all Interface load cells, the LP load pins are a strain guage device with a full Wheatstone bridge ensurung the best possible performance. The phyisical design ensures alignment and anti rotation. 

Available in both wired and wireless versions, the Interface load pin is custom made for your application. Please see the load pin configurator for details. Applications include 

• Sprocket and pulley axle monitoring
• Clevis pin or Shackle loading 
• Crane, lifting and winch systems 
• Mooring line tension measurement
• Hydraulic systems 

View product

LW Load Washer

Load Washer

Normally used for measuring tension on bolts or fasteners, the Interface LW load washer is available in capacities from 5lbf to 100klbf. There is also a wide combination of internal, external and height dimension combinations available to best match your application

View product

LWCF Clamping Force Load Cell

Low height bolt force load cell

The Interface LWCF is has been designed to help you measure the tightening or clamping force for bolts or other fastenings.

The design of the LWCF is a robust, full stainless steel,  low height which is able to be used in a wide range of capacities; To accommodate a wide range of bolt sizes from M6 up to M52

View product

LWPF1 Press Force

Press Force Load Cell

The LWPF1 is a high accuracy; high performance load washer designed for the monitoring of press forces. The low height and large diameter through hole make it easy and convenient for location in many different types of press machines 

View product

LWPF2 Press Force

Press Force Load Cell

The LWPF2 is a high accuracy; high performance load washer designed for the monitoring of press forces. The low height and large diameter through hole make it easy and convenient for location in many different types of press machines 

View product

WMC Rod End

Rod End Load Cell

The all stainless steel construction, low deflection and capacities from grams to thousands of pounds force means the WMC range is used in a wide variety of industrial applications, from aerospace to pharmaceutical. These are considered by many as the force measuring standard when high performance, reliability and accuracy are required

View product

WTSTL Wireless Tension Link

Stainless Steel Tension Link

The WTSTL is Interface’s Tension load link featuring full stainless steel construction, IP67 environmental protection and wireless output. 

The WTSTL is designed for easy installation and use. Wireless transmission range is up to 600 meters and can be used in conjunction with the Interface WTS, wireless hand held indicator

Typical Applications include-

·         Cable tension monitoring

·         Towing or mooring monitoring

·         Under hook hoist and crane weighing

·         Lift gear testing

View product