Displays, Indicators & Electronics Products
9320 TEDS Indicator
Hand Held Indicator
The 9320 Portable Strain Display Load Cell/Force transducer readout is a microprocessor based portable instrument designed to interface with any full bridge sensor with an output sensitivity of up to 50mV/V. Bridge resistances from 85W upwards can be used with the 9320.
The 9320 is TEDS plug and play compliant to IEEE 1451.4
9330 Portable Data Logger
Hi-Speed, Data Logger and Display
The 9330 is a portable digital display and data logger capable of a 3750 Hz update rate at 24 bit resolution. Data can be saved to SD card at 1000Hz and can be exported to a PC via USB with Windows compatible software.
The 9330 can power up to 4 x350 ohm sensors with the calibration files of up to six being stored. The rechargeable battery offers a 300 hour stand by time with up to 20 hours continuous use.
The 9330 is a true, portable, high speed data logger and display for force tranducers, load cells and torque transducers
9820 Digital Indicator
General Purpose Digital Panel Meters
The 9820 is a bipolar, 5 digit LED display featuring 2000Hz high band width and +/- 10VDC analog output. This highly accurate unit also features front panel shunt calibration and tare, peak and valley monitoring.
Rotary Torque Digital Indicator
The modular design of the 9850's allows the use of 7 different types of input channel cards in 2 available slots. Available channels include AC mV/V for use with Rotary Transformer type torque sensors, DC mV/V, +/-5V or +/-10V, 4-20mA, Frequency (speed), Encoder and LVDT position sensors. A 3rd math channel allows display of calculate values such as horsepower, unit conversion, peak or valley, etc. The dual +/-10V analog outputs are assignable to any of the three channels. 2000 Hz sample rate allows true peak monitoring. Included software for graphical data display and logging.
9860 Panel Mount Meter
High Bandwidth Digital Panel Meter
The 9860 is a high bandwidth panel mounted digital display. The 9860 offers direct analogue output by by-passing the A/D converter to offer 1000Hz bandwidth
The 9860 also offers built- in, automatic self calibration for any load cell with a TEDS chip
DFI-02 6 Digit Display
Calibration Grade High Accuracy Force Indicator
The DFI-02 is based on the highly successful DFI-01 and is designed specifically for use in mobile or desktop instrument applications where high accuracy force or weight indication is required. The updated design includes a 24-bit ADC with high stability electronics and the firmware incorporates many new features to make this ideal for ISO-7500/1 calibration systems. The units small physical size and its tilt leg/carry handle offers ease of viewing and portability.
Front panel keys or Remote RS232 offers instant access to Tare, Set Zero, Print, Test (10 display) & Mode (Gross/Net/Peak) with full calibration and set up facilities. The detailed menu driven procedure can be password protected with two access levels to prevent inadvertent changes to calibration or set-up information.
DFI-05L Digital Indicator
DFI-05L MK2 Panel Mount Digital Indicator in PCC1 enclosure
The DFI-05-L is a panel mount indicator designed for use with load cells in either weighing, torque or force measurement applications. Its dual slope 16 bit ADC performs 10 conversions each second with a resolution of 1 part in 63,000 and a maximum sensitivity of 1µV. Load cells can be wired in either 4 or 6 wire configuration and up to 4x 350R units can be connected to each indicator for platform or vessel weight displays. Standard features include Adjustable Filters, Automatic Zero Drift Compensation, Peak and Valley Detection, Display Filter, Last Digit Roundup, In-flight compensation and multiple point calibration with the Lineariser feature (maximum 10 points).
USB Output Module
The DIG-USB is a compact, high performance mV load cell and torque transducer signal converter with digitizing USB connectivity for your PC.
Connecting the DIG-USB to your PC means that data can be exported from your strain gauge device without the need for amplifiers, filters or other devices. The DIG-USB also provides excitation voltage for your device, eliminating the need for any external power.
The Windows compatible software enables real time data viewing, data logging, manipulation and setup.
The DIG-USB can be supplied in the IP50 rated ABS enclosure or as a OEM PCB module
GL220 Data Logger
Graphtec Midi Data Logger
The Graphtec GL220 is a midi size, multi function data logger with ten isolated multi-function input channels with up 10ms sampling rate. This data logger can be used to measure voltage, humidity, temperature, pulse or logic
The 4.3” colour TFT LCD display makes it easy to read data in digital form or wave form and to check your measurement parameter settings.
The GL220 also has 2GB built in flash memory to enable long term data measurement without the need for an external storage device. GL220 also supports USB memory flash drives, enabling direct data logging direct to the USB stick. The USB stick can also be replaced during data collection without loss of data
LCT-1 Ultimate Load Cell Tester
Hand Held Load Cell Tester
The LCT-1 is a battery powered, hand held tester that can be used to test load cells or any strain gauge torque transducer or pressure sensor.
The LCT-1 is easy to use with linearity and repeatability tests carried out without user intervention. Results are displayed via the 16 x 2 line alphanumeric display. Connecting your 4 or 6 wire load cell is easy via the built-in connector’s rising clamp terminals
The case is made from tough ABS and is supplied with a rubberized cover, just in case it gets dropped !
Model 480 Weight Indicator
Bi-directional Weight Indicator
The Interface 480 Digital Weighing Indicator model 480 is a single channel, general purpose indicator designed for process weighing applications in a range of environmental conditions.
It features a large, easy read (20mm) six digit LED display and control panel. The 100,000 count display offers high accuracy coupled with a 7 button control panel that offers simple and swift set up and control. The full stainless steel NEMA 4 (IP66) rated housing protects the display from water ingress and is very easy to clean down.
Wireless Transducer Comms
Developed for Medical, Aerospace, Automotive, and Manufacturing industry needs, the WTS wireless sensor communication system provides away to monitor forces where wires are difficult to manage or install. A load cell or torque transducer is attached to the WTS-AM transmitter, which uses an input of mV/V, ±5V, or 4-20mA and transmits a t2.4GHz output to the receiver. The receiver (WTS-BS) can be either a hand held with 6 digit indicator, or a USB / analogue device capable of logging data during the user’s tests.