|
Building O - 12
Crowthorne Business Estate
Old Wokingham Road
Crowthorne
Berkshire
RG45 6XE
England |
|
Catalogue > Gold Standard
Here is an outline of our Calibration and Gold Standard load cells, components & systems. You will need adobe acrobat reader to view the products with *.pdf files in more detail. |
| 1600u.pdf |
 |
Model 1600 Gold Standard series universal
0.005% non-repeatability
0.01% Creep
High output to 4mV/V
3 run NIST traceable calibration
Internal electronic ID
Factory installed calibration adaptor
Eccentric load compensated
0.0008%/degF temp effect on output
High precision base installed
Tension & Compression |
| 1600co.pdf |
 |
Model 1600 Gold Standard series compression
0.005% non-repeatability
0.01% Creep
High output to 4mV/V
3 run NIST traceable calibration
Internal electronic ID
Eccentric load compensated
0.0008%/degF temp effect on output
High precision base installed
Compression with integral load button |
| 9840.pdf |
 |
Model 9840 calibration grade digital indicator
Ultra-high accuracy digital indicator
True Bipolar operation ±4.5 mV/V input
Internal resolution 24 bits, ±999,999 display counts
Non-linearity <±0.01%
Auto set-up for 25 load cells
Peak/Valley hold with front panel reset
Remote & Front panel Tare
Full duplex RS-232 (optional RS-485)communication
Front panel ShuntCal with 2 selectable resistors
Multi-point linearised calibration
Display unit conversion: lb, kg, N, Psi, Mpa, klb, kN, t.
Vacuum fluorescent display
Full CE compliance
Optional totally independent second channel |
| dfi01.pdf |
 |
Model DFI-01 Calibration grade indicator
Ultra-high accuracy calibration grade indicator
Internal resolution 1:1,000,000 using 20 bit ADC
Display resolution 1:300,000 with ±999,999 display
Bipolar ratiometric input to ±4.5mV/V
Integral non-linearity 0.0007%, differential ±0.5LSB
Sensitivity to 0.1 µVolt
Peak capture facility
Full duplex RS-232/485 communication
Independent RS-232 printer port
CE 97 compliance
Options; Display hold, UKAS calibration, Analogue output & AS600 calibrator |
| scb1.pdf |
 |
Model SCB1 signal conditioning card
Single or dual independent Bipolar or Unipolar inputs
Choice of 3 input ranges 2.5, 5.0 or 7.5 mV/V
20 bit ADC 1048576 (±524288 bipolar) counts maximum @ 8 readings/sec
Sensitivity 0.05µV unipolar, 0.09µV bipolar per count
Non-linearity <0.003% full-scale
Span stability ±0.003%/24 hours, ±0.01% per year
Zero stability ±10µV per year
Internal ShuntCal resistor
Transducer excitation 10Vdc
Full size PC ISA bus card with 9 pin 'D' type input connection |
| hrbsc.pdf |
 |
Model HRBSC single channel high resolution signal conditioning card
Single high resolution Bipolar input ±4.5 mV/V
22 bit ADC ±2 million counts maximum
Integration time 1, 10, 16.7, 20, 100, 166.7 & 300 mSec software selectable
Sensitivity 0.1µV/count with software selectable digital averaging
Non-linearity <0.001% full-scale
Span stability ±0.001%/24 hours, ±0.003% per year
Zero stability ±5µV per year
Internal ShuntCal resistor, software selected
Transducer excitation 10Vdc (optional 5 Vdc)
Full size PC ISA bus card with 9 pin 'D' type input connection |
| This section is currently undergoing amendments and further data on Systems, Software and Transfer Standards will be added shortly. |
|
© 1999-2004 Interface Force Measurements Ltd
Initial design by www.si4.net
|
